ChloraPrep is 2% chlorhexidine gluconate (CHG) and 70% isopropyl alcohol on a single-use sponge applicator, used to prep a patient's skin before a procedure. The two most important things on its label are both about the alcohol. It's flammable. And it has to dry completely before you drape or use cautery or a laser: at least 3 minutes on hairless skin, and up to 1 hour in hair (BD 3 mL label).
Everything else comes down to picking the right size and keeping one applicator to one patient. Here's what to know.
Why is it everywhere?
CDC's catheter infection guideline recommends preparing clean skin with a chlorhexidine preparation stronger than 0.5%, with alcohol, before inserting central venous and peripheral arterial catheters and during dressing changes. That's a Category IA recommendation, CDC's strongest. If chlorhexidine is contraindicated, CDC lists tincture of iodine, an iodophor, or 70% alcohol as alternatives (CDC, 2011). ChloraPrep's 2% CHG in alcohol fits that description, which is why it's in so many procedure rooms.
What's in the applicator?
From BD's 3 mL Drug Facts (BD 3 mL label):
- Active ingredients: chlorhexidine gluconate 2% w/v and isopropyl alcohol 70% v/v, both antiseptics
- Inactive ingredients: purified water, plus FD&C Yellow #6 in the Hi-Lite Orange (tinted) versions
- Use: prepping the patient's skin before surgery to reduce bacteria that can cause skin infection
- One applicator, one use. Discard it afterward.
The tint fades over time and comes off with soap and water or alcohol. Tinted and clear versions are separate catalog items, so order by NDC and make sure you're reordering the one your clinicians expect. If NDCs still look like gibberish, here's how to read one.
What sizes are there?
FDA's listing for ChloraPrep One-Step (NDC 54365-400) includes applicators of 1 mL, 1.5 mL, 1.75 mL, 3 mL, 10.5 mL, and 26 mL, most packed one applicator per pouch (NDC listing). Size should follow the area you're prepping:
- 3 mL: covers up to about 4 × 5 inches (130 cm²). You don't have to use the whole thing (BD 3 mL label).
- 26 mL: covers up to about 13.2 × 13.2 inches (1,126 cm²). Its label says not to use it on an area smaller than 8.4 × 8.4 inches (use a smaller applicator) and not to use it for head and neck surgery (BD 26 mL label).
For most clinics, line starts, and small procedures, the 3 mL is the workhorse. Buying the big one "to be safe" doesn't make anything safer. It just puts more flammable solution on the patient, and the label already tells you not to let it pool.
Why does the dry time matter so much?
There are two clocks on the label, and people mix them up (BD 3 mL label).
Clock one is the prep itself:
- Dry sites like the abdomen or arm: scrub back and forth for about 30 seconds, then let it air dry for about 30 seconds.
- Moist sites like the inguinal fold: scrub for about 2 minutes, then let it air dry for about 1 minute.
- Don't blot or wipe it off.
Clock two is fire safety. The solution gives off flammable vapors. Before you drape or use an ignition source like cautery or a laser, it has to be completely dry: a minimum of 3 minutes on hairless skin, and up to 1 hour in hair. Wet hair is flammable. Don't let solution pool, and remove soaked materials from the prep area before you start.
So if your practice uses electrocautery, the 3-minute minimum belongs in the procedure workflow, not just on the box. CDC says the same thing in general terms: let antiseptics dry according to the manufacturer's recommendation before placing a catheter (CDC).
Who shouldn't get it?
The label says do not use it (BD 3 mL label):
- On patients allergic to chlorhexidine gluconate or any other ingredient
- For lumbar puncture or in contact with the meninges
- On open skin wounds or as a general skin cleanser
Keep it out of the eyes, ears, and mouth. Use with care in premature infants and infants under 2 months.
The label also carries an allergy alert: it can cause a severe allergic reaction, with symptoms like wheezing, shock, facial swelling, hives, or rash. That warning has a history. In February 2017, FDA asked makers of over-the-counter CHG antiseptics to add it after identifying 52 cases of anaphylaxis worldwide. Forty-three of those were reports to FDA's adverse event database from 1969 through mid-2015, including two deaths, and more than half came in after 2010. FDA told clinicians to ask patients about prior reactions and, when an allergy is documented or suspected, to consider alternatives such as povidone-iodine, alcohols, benzalkonium chloride, benzethonium chloride, or PCMX (FDA, Feb 2017).
The purchasing lesson: keep a non-CHG skin prep on the shelf. If chlorhexidine is the only antiseptic in the building, an allergic patient leaves you with nothing to prep with. And anaphylaxis is what your emergency kit is for. Here's our clinic anaphylaxis kit guide.
Why does the package say "non-sterile solution"?
In November 2013, FDA asked manufacturers to package antiseptics for preoperative or preinjection skin prep in single-use containers. FDA also asked them to label voluntarily whether a product is made sterile or nonsterile. Its recommendations to users: apply the antiseptic only once to one patient, don't dilute it after opening, and discard the applicator and any unused solution after the single application. FDA tied this to infections from contaminated antiseptics, with outcomes ranging from localized infections at injection sites to more widespread infections that ended in death (FDA, Nov 2013).
BD's labels now say "Non-sterile Solution" and "Applicator is sterile if package is intact." BD's explanation is that nonsterile doesn't mean contaminated. It means the solution isn't put through a separate sterilization process (BD label change fact sheet).
What that means in practice: one applicator, one patient, one prep. Nobody squeezes the leftover into a cup for the next patient. The logic is the same as with vials. See single-dose vs. multiple-dose vials.
How should it be stored?
Store between 15°C and 30°C (59°F to 86°F). Avoid freezing and temperatures above 40°C (104°F). It's flammable, so keep it away from fire and flame (BD 3 mL label). Don't keep it in a hot car or a supply closet next to the water heater.
Ordering checklist
- Size by prep area. A 3 mL covers up to about 4 × 5 inches. Don't use a 26 mL on anything smaller than 8.4 × 8.4 inches.
- Order by NDC, and confirm tinted vs. clear before you reorder.
- Keep a non-CHG alternative for patients with a chlorhexidine allergy.
- Build the dry time into procedures: at least 3 minutes on hairless skin before draping or cautery, and up to 1 hour in hair.
- One applicator per patient. Discard after use.
- Store at 15–30°C, away from heat and flame.
Order ChloraPrep from Premier
Premier Pharma supplies licensed clinics, surgery centers, urgent care centers, and pharmacies, and every invoice lists the lot number and expiration date for each item. We carry ChloraPrep One-Step 3 mL applicators, 25 per carton (BD). Open a free account. Credential review typically takes 1–2 business days.
Sources